Wika Transmitter

DIAPHRAGM PRESSURE SWITCH
EX-D EXPLOSION PROOF
MA MODEL
CHARACTERISTICS ACCORDING TO TECHNICAL DATA SHEET:
PV 31.11
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE SPAN
ELECTRICAL CONTACTS: 1X SPDT SILVER CONTACT,
ADJUSTABLE DIFFERENTIAL
CALIBRATION RANGE: 150…4000 PSI
WORKING RANGE: STANDARD, WORKING RANGE = 0…4000
PSI, TEST PRESSURE 6000 PSI
SET POINT NOT DEFINED
UNITS: PSI
PROCESS CONNECTION: 1/2 NPT-M ADAPTER
ELECTRICAL CONNECTION: M20X1.5-F
BOX WITH SHELF FOR WALL OR DIRECT MOUNTING
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
MAHXXUR
DIAPHRAGM: AISI 316L PISTON/O-RING:
FPM/CONNECTION: AISI 316L STAINLESS STEEL
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D
SERIAL NUMBER 618693

DIAPHRAGM PRESSURE SWITCH
EX-D EXPLOSION PROOF
MA MODEL
CHARACTERISTICS ACCORDING TO TECHNICAL DATA SHEET:
PV 31.11
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE SPAN
ELECTRICAL CONTACTS: 1X SPDT SILVER CONTACT,
ADJUSTABLE DIFFERENTIAL
CALIBRATION RANGE: 60…600 PSI
WORKING RANGE: STANDARD, WORKING RANGE = 0…600
PSI, TEST PRESSURE 1500 PSI
SET POINT NOT DEFINED
UNITS: PSI
PROCESS CONNECTION: 1/2 NPT-M ADAPTER
ELECTRICAL CONNECTION: M20X1.5-F
BOX WITH SHELF FOR WALL OR DIRECT MOUNTING
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
MAHXXUR
DIAPHRAGM: AISI 316L PISTON/O-RING:
FPM/CONNECTION: AISI 316L STAINLESS STEEL
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D
SERIAL NUMBER 618808

IV519-N3IARN-LPSZZZ-ZZZ-NZZ ZZZZ
IV519 1/2 NPT F – 1/2 NPT F I625 VENT 1/4 NPTF PTFE 6K
5-VALVE MANIFOLD
INSTRUMENT SIDE DISTANCE: 54 MM
CORNER, REMOTE MOUNTING
1/2 NPT FEMALE – 1/2 NPT FEMALE
BODY MATERIAL: INCONEL 625 – 2.4856 – N06625
WITH HOLES FOR BRACKET
VENT CONNECTION: 1/4 NPT FEMALE WITH PLUG
RATED PRESSURE: 6000 PSI / 420 BAR
SEAL GASKET MATERIAL: PTFE
NACE MR0175 SOUR GAS SERVICE & INSPECTION CERTIFICATE 3.1, EN 10204, ALL WET PARTS

IV515 G3/8 F – G1/2 M SWIVEL F316 G 1/4F PTFE 6K
5-VALVE MANIFOLD
INSTRUMENT SIDE DISTANCE: 54 MM
RADIAL, DIFFERENTIAL PRESSURE GAUGE
G 3/8 FEMALE – G 1/2 SWIVEL MALE
BODY MATERIAL: STAINLESS STEEL 316/316L – 1.4401/1.4404 – S31600/S31603
WITH HOLES FOR BRACKET
VENT CONNECTION: G 1/4 FEMALE WITHOUT CAP
RATED PRESSURE: 6000 PSI / 420 BAR
SEAL GASKET MATERIAL: PTFE
NACE MR0175 SOUR GAS SERVICE & INSPECTION CERTIFICATE 3.1, EN 10204, ALL WET PARTS

IV202 1/2 NPT M – 1/2 NPT F I625 VENT 1/4 NPTF PTFE 6K
BLOCK AND VENT VALVE, 2-VALVE MANIFOLD
EXECUTION: SQUARE, IN-LINE
1/2 NPT MALE – 1/2 NPT FEMALE
INCONEL 625 – 2.4856 – N06625
WITHOUT HOLES FOR BRACKET
VENT CONNECTION: 1/4 NPT FEMALE WITH PLUG
RATED PRESSURE: 6000 PSI / 420 BAR
SEAL GASKET MATERIAL: PTFE
NACE MR0175 SOUR GAS SERVICE & INSPECTION CERTIFICATE 3.1, EN 10204, ALL WET PARTS

IV211-N3HCRN-MPSZZZ-ZZZ-NZZ ZZZZ
IV211 1/2 NPT F – 1/2 NPT F HASTELLOY BREATHER 1/4 NPTF PTFE 10K
BLOCK AND VENT VALVE, 2-VALVE MANIFOLD
EXECUTION: FLAT, CORNER
1/2 NPT FEMALE – 1/2 NPT FEMALE
HASTELLOY C276 – 2.4819 – N10276
WITH HOLES FOR BRACKET
VENT CONNECTION: 1/4 NPT FEMALE WITH PLUG
RATED PRESSURE: 10000 PSI / 689 BAR
SEAL GASKET MATERIAL: PTFE
NACE MR0175 SOUR GAS SERVICE & INSPECTION CERTIFICATE 3.1, EN 10204, ALL WET PARTS

UE Explosion Proof Pressure Switch mod. J120-
193*M201*6361-704*E7MZ
Approvals: ATEX II 2 G Ex d IIC T6 Gb; II 2 D
Ex tb IIIC T85°C Db IP66
Sensor: Welded 316 stainless steel diaphragm
and 1/2” NPT-F pressure connection, large
0.72” (18 mm)
orifice for clean-out purposes (NACE MR-0175
compliant)
Enclosure: Die cast aluminum, epoxy powder
coated, IP66 (4X) classification
Electrical Connection: M20x1,5 (E7MZ)
One SPDT Microswitch rating 15A @ 125/250/480
VAC
Adjustable Set Point Range: 1,4 / 35 bar
Operating Pressure: 103 bar Proof: 172 bar
M201 Factory set at 25 bar direction to be
specified
6361-704 Stainless steel mounting bracket
2”pipe Mounting

UE Explosion Proof Pressure Switch mod. J120-
191*M201*6361-704*E7MZ
Approvals: ATEX II 2 G Ex d IIC T6 Gb; II 2 D
Ex tb IIIC T85°C Db IP66
Sensor: Welded 316 stainless steel diaphragm
and 1/2” NPT-F pressure connection, large
0.72” (18 mm)
orifice for clean-out purposes (NACE MR-0175
compliant)

Enclosure: Die cast aluminum, epoxy powder
coated, IP66 (4X) classification
Electrical Connection: M20x1,5 (E7MZ)
One SPDT Microswitch rating 15A @ 125/250/480
VAC
Adjustable Set Point Range: 0,7 / 6,9 bar
Operating Pressure: 103 bar Proof: 172 bar
M201 Factory set at 5 bar direction to be
Specified 6361-704 Stainless steel mounting bracket
2”pipe Mounting

UE Explosion Proof Pressure Switch mod. J120-
194*M201*6361-704*E7MZ
Approvals: ATEX II 2 G Ex d IIC T6 Gb; II 2 D
Ex tb IIIC T85°C Db IP66
Sensor: Welded 316 stainless steel diaphragm
and 1/2” NPT-F pressure connection, large
0.72” (18 mm)
orifice for clean-out purposes (NACE MR-0175
compliant)
Enclosure: Die cast aluminum, epoxy powder
coated, IP66 (4X) classification
Electrical Connection: M20x1,5 (E7MZ)
One SPDT Microswitch rating 15A @ 125/250/480
VAC
Adjustable Set Point Range: 6,9 / 117 bar
Operating Pressure: 138 bar Proof: 172 bar
M201 Factory set at 40 bar direction to be
specified
6361-704 Stainless steel mounting bracket
2”pipe Mounting

57494079
COMPACT THERMOSTAT
TCA MODEL
TECHNICAL SPECIFICATIONS ACCORDING TO
TECHNICAL DATA SHEET: TV 31.65 (TCA)
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE
SPAN
HOUSING MATERIAL: ALUMINUM, COPPER FREE
SENSOR: DIRECT MOUNTING
1XSPDT, SILVER CONTACT
90 … 160°C, WORKING RANGE -40 … 170°C,
TEST TEMPERATURE 180°C
CONFIGURATION TO CUSTOMER SPECIFICATION
PROCESS CONNECTION: 1/2 NPT MALE
ELECTRICAL CONNECTION: M20X1.5-F ADAPTER
ACCESSORY FOR MOUNTING ON 2″ PIPE
APPROVALS / CERTIFICATES: WITH
STEM LENGTH FOR DIRECT MOUNTING: STANDARD 125
MM
SENSOR DIMENSIONS: ACTIVE LENGTH X = 55 MM,
STEM DIAMETER D=9.5 MM
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
UNIT: °C
TCA2B
1. SET POINT: 130.00 °C INCREASE,
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D

57494081
COMPACT THERMOSTAT
TCA MODEL
TECHNICAL SPECIFICATIONS ACCORDING TO
TECHNICAL DATA SHEET: TV 31.65 (TCA)
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE
SPAN
HOUSING MATERIAL: ALUMINUM, COPPER FREE
SENSOR: DIRECT MOUNTING
1XSPDT, SILVER CONTACT
160 … 250°C, WORKING RANGE -40 … 280°C,
TEST TEMPERATURE 300°C
CONFIGURATION TO CUSTOMER SPECIFICATION
PROCESS CONNECTION: 1/2 NPT MALE
ELECTRICAL CONNECTION: M20X1.5-F ADAPTER
ACCESSORY FOR MOUNTING ON 2″ PIPE
APPROVALS / CERTIFICATES: WITH
STEM LENGTH FOR DIRECT MOUNTING: STANDARD 125
MM
SENSOR DIMENSIONS: ACTIVE LENGTH X = 55 MM,
STEM DIAMETER D=9.5 MM
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
UNIT: °C
TCA2B
1. SET POINT: 180.00 °C INCREASE,
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D

57494080
COMPACT THERMOSTAT
TCA MODEL
TECHNICAL SPECIFICATIONS ACCORDING TO
TECHNICAL DATA SHEET: TV 31.65 (TCA)
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE
SPAN
HOUSING MATERIAL: ALUMINUM, COPPER FREE
SENSOR: DIRECT MOUNTING
1XSPDT, SILVER CONTACT
130 … 190 °C, WORKING RANGE -40 … 190°C,
TEST TEMPERATURE 210°C
CONFIGURATION TO CUSTOMER SPECIFICATION
PROCESS CONNECTION: 1/2 NPT MALE
ELECTRICAL CONNECTION: M20X1.5-F ADAPTER
ACCESSORY FOR MOUNTING ON 2″ PIPE
APPROVALS / CERTIFICATES: WITH
STEM LENGTH FOR DIRECT MOUNTING: STANDARD 125
MM
SENSOR DIMENSIONS: ACTIVE LENGTH X = 55 MM,
STEM DIAMETER D=9.5 MM
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
UNIT: °C
TCA2B
1. SET POINT: 160.00 °C INCREASE,
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M780
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 780 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M820
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 820 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 1.2 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M860
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 860 mm
Housing material: 316 stainless steel

Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 1.2 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M980
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 980 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 1.4 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M1100
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 1100 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 1.6 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M1220
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 1220 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 1.7 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M1740
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 1740 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 2.5 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M2020
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 2020 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 2.9 kg

KSR Kuebler Type BMD-FR Level Indicator
for magnetic level gauge
Model: MRFV-M2300
Temperature range: Standard (-20 up to 200ºC)
Measuring range: 2300 mm
Housing material: 316 stainless steel
Indicating elements: Red & white stainless steel flaps
Indicator window: Makrolon PC
Weight: 3.3 kg

IV211-N3HCRN-MPSZZZ-ZZZ-NZZ ZZZZ
IV211 1/2 NPT F – 1/2 NPT F HASTELLOY BREATHER
1/4 NPTF PTFE 10K
BLOCK AND VENT VALVE, 2-VALVE MANIFOLD
EXECUTION: FLAT, CORNER
1/2 NPT FEMALE – 1/2 NPT FEMALE
HASTELLOY C276 – 2.4819 – N10276
WITH HOLES FOR BRACKET
VENT CONNECTION: 1/4 NPT FEMALE WITH PLUG
RATED PRESSURE: 10000 PSI / 689 BAR
SEAL GASKET MATERIAL: PTFE
NACE MR0175 SOUR GAS SERVICE & INSPECTION
CERTIFICATE 3.1, EN 10204, ALL WET PARTS

57492050
COMPACT THERMOSTAT
TCA MODEL
TECHNICAL SPECIFICATIONS ACCORDING TO TECHNICAL
DATA SHEET: TV 31.65 (TCA)
REPEATABILITY OF THE SET POINT: ≤ 1% OF THE SPAN
HOUSING MATERIAL: ALUMINUM, COPPER FREE
SENSOR: DIRECT MOUNTING
1XSPDT, SILVER CONTACT, HERMETICALLY SEALED, ARGON
SEALED
10 … 70 °C, WORKING RANGE -40 … 70°C, TEST TEMPERATURE
90°C
CONFIGURATION TO CUSTOMER SPECIFICATION
PROCESS CONNECTION: G 1/2 A MALE
ELECTRICAL CONNECTION: 1/2 -14 NPT-F
DIRECT OR WALL MOUNTING, FIXING HOLES ON THE CASING
APPROVALS / CERTIFICATES: WITH
STEM LENGTH FOR DIRECT MOUNTING: STANDARD 125 MM
SENSOR DIMENSIONS: ACTIVE LENGTH X = 65 MM, STEM
DIAMETER D=9.5 MM
BRAND: WIKA INSTRUMENTS ITALIA
PROTECTION DEGREE: IP66
UNIT: °C
TCA2B
1. SET POINT: 50.00 °C INCREASE,
APPROVALS/CERTIFICATIONS
IECEX-ATEX EX D

Order code: TCA2BB-CACC-GASZZZAB1ZZ ZCK C005000IZZZZZZZZ F5-C5- – – – –

Overview: TCA2BB – 10 … 70 °C – G 1/2 A male – Electrical connection: 1/2 -14 NPT-F compact temperature switch TCA switch enclosure: aluminium,copper-free sensor version: direct mounting contact version: 1xSPDT, silver contact, hermetically sealed with argon gas setting range: 10 … 70 °C, working range -40 … +70°C, proof temperature +90°C Set point definition: Set Point customer-specifically configured Process connection: G 1/2 A male Electrical connection: 1/2 -14 NPT-F Mounting: standard direct or wall mounting, fixing bore on the case Stem length for direct mounting: standard 125 mm Sensor Dimensions: active length X = 65 mm, stem diameter D=9,5 mm Brand: WIKA Instruments Italia Ingress Protection: IP66 Specifications according to data sheet: TV 31.65 Repeatability of set point: ≤ 1% of span 1. set point: 50.00 °C increasing,

“WIKA” THERMOMETER

TYPE S 5550,CENTER BACK, CLASE 1.0 (DIN 16 203)
CASE DIAMETER 100 MM., ELEMENT MAT. BIMETAL
ELEMENT DIA. 6 MM., ELEMENT CONN. M18 x 1.5 MALE, PIPE MOUNTING
REF. WIKA GMBH
0-120° C°, L1=260 MM.

57487867
VBS SPDT 24 VDC M20X1,5
RESET COIL: 24 VDC
SWITCH CONTACTS: SPDT
FULL SCALE RANGE: 0-5 G
ELECTRICAL CONNECTIONS: M20X1,5 DIRECT
MOUNTING BRACKETS: INCLUDED
ENCLOSURE: CAST ALUMINIUM PAINTED
ACCORDING TO 2014/34/EU ATEX
EX II 2G EX D IIC T6 OR T5 GB
T5 (-20°C+55°C)
T6 (-20°C+40°C)

57490181
ARV1,5″-VUUU-L800/12-V44A
Float level switch with magnet Type FLS-SA
Material: 316Ti stainless steel (DIN 1.4571)
Pressure: 1 bar
Temperature range: -20°C to 80°C
Fluid density: 1000 kg/m³
Case: Aluminium
Degree of protection: IP66/68
Electrical connection: M20 x 1.5 mm with cable gland
Process connection: 1-1/2″BSP descending mounting thread
Switching function 1: Changeover contact (SPDT) 55 mm
Switching function 2: Changeover contact (SPDT) 400 mm
Switching function 3: Changeover contact (SPDT) 755 mm
Switching capacity: max. AC 230V; 40VA; 1A / DC 230V; 20W;
0.5A
Float: 316Ti V44A stainless steel
External diameter of the float: 44 mm
Number of floats: 2 pieces
Guide tube: O.D. 12 mm Immersion length (L): 800 mm
Float stop: Float collar
Float fits through the connection nozzle
57490181
ARV1,5″-VUUU-L800/12-V44A
Float level switch with magnet Type FLS-SA
Material: 316Ti stainless steel (DIN 1.4571)
Pressure: 1 bar
Temperature range: -20°C to 80°C
Fluid density: 1000 kg/m³
Case: Aluminium
Degree of protection: IP66/68
Electrical connection: M20 x 1.5 mm with cable gland
Process connection: 1-1/2″BSP descending mounting thread
Switching function 1: Changeover contact (SPDT) 55 mm
Switching function 2: Changeover contact (SPDT) 400 mm
Switching function 3: Changeover contact (SPDT) 755 mm
Switching capacity: max. AC 230V; 40VA; 1A / DC 230V; 20W;
0.5A
Float: 316Ti V44A stainless steel
External diameter of the float: 44 mm
Number of floats: 2 pieces
Guide tube: O.D. 12 mm Immersion length (L): 800 mm
Float stop: Float collar
Float fits through the connection nozzle

switchGAUGE PGS23.100/160 tubular spring pressure
gauge
With electrical contacts, for the process
industry, DN 63
Characteristics according to technical data
sheet: PV 22.02 and IN 00.48
Contact: Model 821 magnetic snap contact
first contact function: closes (N.O) (1)
second contact function: opens (N.C.) (2)
Electrical connection: Side terminal block
nominal diameter: 100
Working range: instrument scale range
Scale range: 0…16 bar
Process connection: Separator
Process connection: radial
Damping fluid: with
Case: with vent hole
Standard pressure gauge: International (Europe)
Accuracy class: Class 1.0
Overpressure safety: Standard
Case material: Aisi 304 1.4301 Acc-Ni-Cr
(Standard)
Case Surface: Unpolished
Filling the case: M50 silicone oil
Measuring element material: Measuring system in
AISI 316L
Transparent: Multi-layer safety glass
Degree of protection: IP65
Movement: Stainless steel
Manufacturer’s logo: *WIKA*
serial number on the dial: Serial number *…*
DSS1 measuring system
With 1 single separator
High-Side Assembly Specifications: Direct Mount
Filling liquid: KN 2 Silicone oil for general
applications
Minimum process temperature: 0°C
Maximum process temperature: + 100°C
Minimum ambient temperature: + 10°C
Maximum ambient temperature: + 40°C
Typ_ID-No: EZE drive
Diaphragm seal, flanged, flush diaphragm
Characteristics according to technical data
sheet: DS 99.27
Membrane separator: Model 990.27
Membrane separator: Model 990.27
Reference standard for process connection:
according to ASME B16.5
Process connection: 2″
Nominal pressure: Class 150
Seal surface: RFSF
Upper body material / main body material:
Stainless steel 1.4404 (316L); UNS S31603
Membrane material: Stainless steel 1.4435 (316L);
UNS S31603
gasket surface material: Stainless steel 1.4404
(316L); UNS S31603

P/F:PRESS.SWITCH”BOURDON SEDEME’TYPE:RPPN-DA3-204
CONN:G1/2″MALE,RANGE:0.5-10BAR
SUPPLY: 250VAC, 1A, TAG:PS-9110-06/08A/B/C
HERMETICALLY SEALED SWITCH
SUPPLIER:BOURDON SEDEME CO.

REPAIR KIT
P/F DIFF. PRESS.INDICATOR SWITCH”WIKA” TYPE:700.0
KONTAKT:851.3 , POWER:30 V , 0.2A,3W, ENO:7
SUPPLIER:WIKA CO.

DIFF.PRESSURE SWITCH
MODEL:700.01.080 COMPLETE

REPAIR KIT
P/F:PRESSURE SWITCH”FEMA(HONEYWELL)” TYPE:EX-VNM3
RANGE:-250 TO 100 MBAR, PTB O2ATEX 1121
CONNECTION:1/2″ IP 65
SUPPLIER:FEMA(HONEYWELL) CO.

01: TEMPERATURE SENSOR’ ‘WIKA’ ‘MODEL:TRI0-13
03: P/F:TEMPERATURE SENSOR’ ‘WIKA’ ‘MODEL:TR10-D
04: TYPE:2*PT100,2WIRE,FtANGE:-50C…+250C
05: CONN:1/2 NPT,THERMOWELL OUTER DIAMETER:8MM
06: INSERTION LENGTB:160MKNOMINATION
LENGT8:167MM,
07: ORDER CODE;TR10-D-M-TAZRPJ-2-GRZZZ-007-DEK-CE-R-00160-ZZ
08: RESISTANCE THERMOMETER RTD
26: SUPPLIER:WIKA CO.
46: MT11:9000759-PA,AMEND 9600032-PA,9700765- PA,1422268-PA
RTD THERMOMETER COMPLETE

01: TEMP.TRANSMITTEW ‘WIKA’ MODEL:T32.1S.0IS
P/F:TEMP.TRANSMITTER’ ‘WIKA’ MODEL:T32.1S.0IS
04: RANGE:0-100 DEG.C,OUTPUT:4-20MA
05: TRD 20,TAG:TT02.03 & TT04.03,TE-3113,TT-21021C
06: 11 1/2GEEXD11CT1BIST6,TRANSMITTER:T32-10-002
07: PT100 3L/W/F,12-30VDC,CONN:1/2′
08: TAG:121147-01024/B FOR PH:4&S
26: SUPPLIER:WIKA CO
35: NOTE:USED FOR OUTLINE GAS REDUCING STATION
71: TEMPTRANSMITTER
72: MODEL:T32.1S.OIS COMPLETE
73: P/NO:TR1O-L-M-DJ13TT-6-LFt2ZK-130-
74: CBT-CF-R-00345-ZZ

01: TEMPERATURE TRANSMITTER WIKA. MODEL:TRI0
03: P/F:TEMPERATURE TRANSMITTER ‘WIKA‘ MODEL:TRIO
05: TERMORESISTENCIA-RTD PT100
08: INGRESS PROTECTION:IP65;EX IB IICTS-SHEATH
MAT.:ALUMINUM
09: DIE CASTFLANGE/FLANG:1 ½
‘ ‘ASME B16.5 CL 300
RF/WELL MAT.S.S
10: ELEMENT LENGTH:150 MM
26: SUPPLIER:WIKA CO.
51: MODEL:TR10-TW50-T24
52: LIMIT RANGE:-50 TO 400 DEG C ,OUTPUT:4-20 MA
71: TEMPERATURE TRANSMITTER & ELEMENT

PRESSURE GAUGE DIAPHRAGM SEAL, FLANGED
PROCESS CONNECTION MODEL 990.27 WITH
PRESSURE GAUGE MODEL 233.30 NS 100, CONN. 1/2 NPT.
PROCESS CONN. FLANG ACC. TO ASME B 16.5, LIQUID FILLING
UPPER BODY AND WETTED PART OF DIAPHRAGM SEAL 1.4404 (316L)
REF. WIKA OR APP. EQUIVALENT
CONN. FLANG 2″ CL.300 RF.SF
SCAL RANG (BAR)
0-2.5 BAR, PI-7214, PI-7215, PI-1190

0-4 BAR, PI-7211, PI-7212, PI-7213

57471468
TUBULAR SPRING PRESSURE GAUGE 232.50/233.50
STAINLESS STEEL CASE
MODEL: 233.50
CHARACTERISTICS ACCORDING TO THE TECHNICAL SHEET: PM
02.02
MEASURING SYSTEM: STAINLESS STEEL
LIQUID FILLING: WITH
DIAMETER: 100MM
SCALE RANGE: 0…10 BAR
PROCESS CONNECTION: SEPARATOR
STEM POSITION: RADIAL
TRANSPARENT: MULTILAYER SAFETY GLASS
HAND: ADJUSTABLE HAND
ACCURACY CLASS: CLASS 1.0
OVERPRESSURE SAFETY: STANDARD
CASE MATERIAL: AISI 304 1.4301 ACC-NI-CR (STANDARD)
CASE SURFACE: UNPOLISHED
MATERIAL OF THE MEASURING ELEMENT: MEASURING SYSTEM
IN AISI 316L
CASE FILLING: GLYCERIN
PROTECTION DEGREE: IP65
MOVEMENT: STAINLESS STEEL
PACKING: SINGLE PACK
PRESSURE GAUGE STANDARD: INTERNATIONAL (EUROPE)
MANUFACTURER LOGO: *WIKA*
WITH SERIAL NUMBER
DSS1 MEASURING SYSTEM
WITH 1 SINGLE SEPARATOR
HIGH-SIDE ASSEMBLY SPECS: DIRECT MOUNT
FILLING LIQUID: KN 2 SILICONE OIL FOR GENERAL APPLICATIONS
MINIMUM PROCESS TEMPERATURE: 0°C

MAXIMUM PROCESS TEMPERATURE: + 100°C
MINIMUM AMBIENT TEMPERATURE: + 10°C
MAXIMUM AMBIENT TEMPERATURE: + 40°C
DIAPHRAGM SEAL, FLANGED, FLUSH DIAPHRAGM
CHARACTERISTICS ACCORDING TO THE TECHNICAL SHEET: DS
99.27
DIAPHRAGM SEPARATOR: MODEL 990.27
DIAPHRAGM SEPARATOR: MODEL 990.27
REFERENCE STANDARD FOR PROCESS CONNECTION: ACCORDING
TO ASME B16.5
PROCESS CONNECTION: 2″
NOMINAL PRESSURE: 150 CLASS
GASKET SURFACE: RFSF
TOP BODY MATERIAL / MAIN BODY MATERIAL: STAINLESS STEEL
1.4404 (316L); UNS S31603
MEMBRANE MATERIAL: HASTELLOY C276 2.4819; UNS N10276
GASKET SURFACE MATERIAL: HASTELLOY C276 2.4819; UNS
N10276
LABEL: WIKA STANDARD WITHOUT / WITH TAG NUMBER

TUBULAR SPRING PRESSURE GAUGE 232.50/233.50
STAINLESS STEEL CASE
MODEL: 233.50
CHARACTERISTICS ACCORDING TO THE TECHNICAL SHEET: PM
02.02
MEASURING SYSTEM: STAINLESS STEEL
FILLING LIQUID: CON
DIAMETER: 100MM
SCALE RANGE: 0…10 BAR
PROCESS CONNECTION: SEPARATOR
STEM POSITION: RADIAL
TRANSPARENT: MULTILAYER SAFETY GLASS
HAND: ADJUSTABLE HAND
ACCURACY CLASS: CLASS 1.0

OVERPRESSURE SAFETY: STANDARD
CASE MATERIAL: AISI 304 1.4301 ACC-NI-CR (STANDARD)
CASE SURFACE: UNPOLISHED
MATERIAL OF THE MEASURING ELEMENT: MEASURING SYSTEM
IN AISI 316L
CASE FILLING: GLYCERIN
PROTECTION DEGREE: IP65
MOVEMENT: STAINLESS STEEL
PACKING: SINGLE PACK
STANDARD PRESSURE GAUGE: INTERNATIONAL (EUROPE)
MANUFACTURER LOGO: *WIKA*
WITH SERIAL NUMBER
DSS1 MEASURING SYSTEM
WITH 1 SINGLE SEPARATOR HIGH-SIDE ASSEMBLY SPECS: DIRECT MOUNT
FILLING LIQUID: KN 2 SILICONE OIL FOR GENERAL APPLICATIONS
MINIMUM PROCESS TEMPERATURE: 0°C
MAXIMUM PROCESS TEMPERATURE: + 100°C
MINIMUM AMBIENT TEMPERATURE: + 10°C
MAXIMUM AMBIENT TEMPERATURE: + 40°C
DIAPHRAGM SEAL, FLANGED, FLUSH DIAPHRAGM
CHARACTERISTICS ACCORDING TO THE TECHNICAL SHEET: DS
99.27
DIAPHRAGM SEPARATOR: MODEL 990.27
DIAPHRAGM SEPARATOR: MODEL 990.27
REFERENCE STANDARD FOR PROCESS CONNECTION: ACCORDING
TO ASME B16.5
PROCESS CONNECTION: 2″
NOMINAL PRESSURE: 150 CLASS
GASKET SURFACE: RFSF
TOP BODY MATERIAL / MAIN BODY MATERIAL: STAINLESS STEEL
1.4404 (316L); UNS S31603
MEMBRANE MATERIAL: TANTAL; UNS R05200
GASKET SURFACE MATERIAL: TANTAL; UNS R05200
LABEL: WIKA STANDARD WITHOUT / WITH TAG NUMBER

(Silicon Oil Case Filling Option) Wika, ZT4080.00,
DSS1-MF990.27-123X50-DZZZD-C8A65ZA1-ZZAZZZZZ
WAZ-Z LABEL-PG1DE-ZZZZZ- ZZZZZ 233.50-E-BG410ZCA-
UZHZAZZ-ZZZZ 213D3DZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM201SFC1-H2-H2ZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50
Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm
Scale range: 0…10 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety
glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare Material pressure element: Measuring System
316L Case filling fluid: Silicon oil M50 Ingress protection: IP
65 Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: 0°C Process temperature
max.: + 100°C Ambient temperature pressure meas. min: +
10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model
990.27 Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 150 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404
(316L); UNS S31603 Diaphragm material: Hastelloy C276
2.4819; UNS N10276 Sealing face material: Hastelloy C276
2.4819; UNS N10276 Label: WIKA standard without / with Tagnumber

(Silicon Oil Case Filling Option) Wika, ZT4080.00,
DSS1-MF990.27-123X50-DZZZD-C7265ZA1-ZZAZZZZZ
WAZ-Z LABEL-PG1DE-ZZZZZ- ZZZZZ 233.50-E-BG410ZCA-
UZHZAZZ-ZZZZ 213D3DZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM201SFC1-TL-TLZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50 Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm
Scale range: 0…10 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety
glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare Material pressure element: Measuring System
316L Case filling fluid: Silicon oil M50 Ingress protection: IP
65 Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: + 10°C Process
temperature max.

: + 80°C Ambient temperature pressure meas.
min: + 10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model
990.27, Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 150 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404
(316L); UNS S31603 Diaphragm material: Tantalum; UNS
R05200 Sealing face material: Tantalum; UNS R05200 Label:
WIKA standard without / with Tag-number

WIKA 762.14.100, MONEL 0-60 mbar, 2×1/2″NPT female, PN 40 bar IP54, class 2.5, -20/+100°C

WIKA Differential pressure switch DA-40 0-400 mbar, 2×1/4 -NPT-F – 1/2 -14 NPT- 1xSPDT silver, IECEx-ATEX Ex d

PROCESS PRESSURE TRANSMITTER UPT
MODEL: UPT-20
CHARACTERISTICS ACCORDING TO TECHNICAL SHEET: PE 86.05
POWER SUPPLY: DC 12 … 36 V / DC 14 … 30 V
PRESSURE RANGE: ADJUSTABLE WITH TURN DOWN UP TO 100: 1
DEGREE OF PROTECTION: IP 66/67 WITH PRESSURE COMPENSATION
TYPE OF PROCESS CONNECTION: PRESSURE PORT WITH STANDARD CONNECTION
ENCLOSURE EXECUTION: PLASTIC VERSION, IP66 / IP67
DIGITAL DISPLAY: WITH INTEGRATED 4 1/2 DIGIT LCD DISPLAY
SHIELD: POLYCARBONATE PLASTIC SHIELD
OUTPUT SIGNAL: 4 … 20 MA, 2 WIRES
ELECTRICAL CONNECTION: M20X1,5 / BLACK PA CABLE GLAND (Ø6-12MM)
MEASUREMENT RANGE: -1 … 15 BAR
PROCESS CONNECTION: G 1/2 B
ACCURACY: 0.15% OF SPAN
SENSOR PRINCIPLE: PIEZORESISTIVE

Differential pressure switch ZT2183.00 DA-40-UN-MANB
BAMZZZAA1ZZ ZCW F4-C5- – – – –
Differential pressure switch, flameproof enclosure Ex d
Models DA and DA10
Specifications according to data sheet: PV 35.43
Repeatability of set point: ≤ 1% of span
static and one-side pressure: 40 bar
contact version: 1x SPDT silver contact
setting range: 0…400 mbar
set point definition: Set Point not defined
process connection: 2×1/4 -NPT-F
electrical connection: 1/2 -14 NPT-F
Mounting: Enclosure with plate for wall or direct mounting
Diaphragm Material: AISI 316
brand: WIKA Instruments Italia
Connection: Stainless steel AISI 316L
DA-40UN
Approvals / Certificates
IECEx-ATEX Ex d
*Remarks: Electrical connection for 14159767 is 1/2 -14 NPTF
instead of M20.

Differential pressure gauge ZT2361.00, 762.14-ZZZESMG160Z-
AK-UDZZASZZ-ZZZZ 7B 4ZLDFZZIZZZZZZ112ZZ
LABEL-PG1DE-ZZZZZ
LABEL-PG1DE-ZZZZZ
Differential pressure gauge, multi purpose, with diaphragm
element,
high overpressure limit
Model: 762.14
Specifications according to data sheet: PM 07.13
Case: stainless steel
Bezel ring: stainless steel
Movement: stainless steel
Wetted parts: Monel or Monel / Hastelloy C276 + FPM
Case filling: without
Nominal size: 100 mm
Overpressure safety/working pressure max.: PN 40 bar Scale range: 0…60 mbar
Process connection: 2 x 1/2 NPT female
Connector location: lower mount
Venting of pressure chamber/flushing connection: venting of
pressure chamber
Permissible ambient temperature: -20…+60 °C
Permissible medium temperature: -20…+100 °C
Accuracy class: class 2.5
Case material: Stainless steel 316SS
Case surface: bare
Ingress protection: IP 54
Pressure Gauge Standard: International (standard Europe)
Manufacturer logo: *WIKA*
serial number on dial: Serial number *…*
stop pin on dial: at 6 o’clock
with zero adjustment at adjustable pointer

Bourdon Tube Pressure Gauges, 67203214, Model: 233.50
233.50.100 400 bar 2nd scale psi 1/2 NPT lower mount

Bourdon Tube Pressure Gauges, 67298324 Model: 233.50
233.50.100 1 bar 2nd scale psi 1/2 NPT lower mount

Bourdon Tube Pressure Gauges, 67252391 Model: 233.50
233.50.100 250 bar 2nd scale psi 1/2 NPT lower mount

Bourdon Tube Pressure Gauges, 67239578 Model: 233.50
233.50.100 10 bar 2nd scale psi 1/2 NPT lower mount

Bimetal thermometer, ZT5311.00, S5550 -4-C1L-NDB375HZZ-
ZZZZZZZ TB FZZZEZSVID-AZ1ZZZZZ1ZZZZ
S5550/4, NS100, 0…200°C, L1=375 x6mm

Bimetal thermometer, ZT5311.00, S5550 -4-CEB-NDB585HZZ-
ZZZZZZZ TB FZZZEZSVID-AZ1ZZZZZ1ZZZZ
S5550/4, NS100, -50…+100 °C, L1=585 x6mm

Bimetal thermometer, 33024594
S5550/4, NS100, 0.

..160°C, 1050 mm (SSG-500715) x6mm

ZT464400
Manufacturer: WIKA
FLOWEDGE
NOMINAL SIZE AND RATING: Ø 16” ASME 300 WN-RF ACC. TO
B16.5 STANDARD
BODY MATERIAL: ASTM A106 GR.B
FLANGE MATERIAL: ASTM A105
PRESSURE TAPS: NO. 1 COUPLE Ø 2″ ASME 300 WN-RF MADE IN
A105
IDENTIFICATION: STAINLESS STEEL PLATE
H/D=0,6
OVERALL TOTAL LENGTH: 1540 MM
PAINTING ACC.TO EM STD
TAG-1 (SS TAG PLATE)
FE-12115; FE-12116; FE-12215
Gas actuated thermometer, 33024382
F73.100/4, 0…300°C, L1=300 mmx8mm,

ZT464400
Manufacturer: WIKA
FLOWEDGE
NOMINAL SIZE AND RATING: Ø 10” ASME 300 WN-RF ACC. TO
B16.5 STANDARD
BODY MATERIAL: ASTM A106 GR.B
FLANGE MATERIAL: ASTM A105
PRESSURE TAPS: NO. 1 COUPLE Ø 2″ ASME 300 WN-RF MADE IN
A105
IDENTIFICATION: STAINLESS STEEL PLATE
H/D=0,6
OVERALL TOTAL LENGTH: 1180 MM
PAINTING ACC.TO EM STD
TAG-1 (SS TAG PLATE)
FE-13101

ZS700801
Manufacturer: –
DOCUMENTATION AND TEST
– 3.1 MATERIAL CERTIFICATE
– CALCULATIONS FOR APPROVAL
– DRAWINGS FOR APPROVAL
– DYE PENETRANT TEST ON EXTERNAL SURFACES ONLY WHERE
ACCESSIBLE
– HYDROSTATIC TEST PRESSURE
– VISUAL AND DIMENSIONAL CHECK
– 2014/68/EU PED DECLARATION

ZC504000 SPECIAL PACKAGING

Wedge Meter Flow Element
Model FLC-WG Body Size: 16″,
Connection Size & Rating: Flange Size 16″ #300 RF, ASME B16.5
Body Material: CS A106 Gr.B,
Flange Material: ASTM CS A105,
Overall Lenght: ~1540mm
Flow Nozzle Connections: 2 x Flange 2″ #300 RF
Accessories: Gasket, Bolts & Nuts for Connection of FTs (2 Sets)
Model Code: FLC-WG
Manufacturer / Origin: Wika (Germany)

WIKA Wedge Flow Meter Model No.: FLC-WG ZT4650.00
Line Size: 16"
Pipe Sch.: 10
End Flange Type & Rating: 300# WNRF as per ASME
B16.5
Pipe Material: A106 Gr.B
Wedge Material: A182 F316/316L
Flange Material: ASTM A105
Pressure Tap Size: 2" 300# WNRF as per ASME B16.5
Pressure Tap Qty.: 1 pair
Tap Orientation: To be advised
Approx. End to End length: 1540.00 mm
Pressure Tap Size: : As indicated against each Tag No.
Accuracy: within ± 0.5 % (calibrated)

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=780mm
Measuring Range:780mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=820mm
Measuring Range:820mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=860mm
Measuring Range:860mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=980mm
Measuring Range:980mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=1100mm
Measuring Range:1100mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=1220mm
Measuring Range:1220mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=1740mm
Measuring Range:1740mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=2020mm
Measuring Range:2020mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

ZT3719.00
Magnetic Display for Level Indicator
Product type:MRKV, M=2300mm
Measuring Range:2300mm
Material:Ceramic rollers in stainless steel case, indicator
color Blue/White
Remark:With 2pcs clamp hoops, material 304

Wika, Pressure Gauge, DSS1-MF990.27-123X50-DZZZDC8A65ZA1-
ZZAZZZZZ WAZ-Z LABEL-PG1DE-ZZZZZZZZZZ
233.

50-E-BG440Z-CA-UZHZAZZ-ZZZZ
213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ

Wika TR 15-2-0-M-M-1AW-12-Y-FW-D-04000-1-J-K-0100-DB-
T-C-D-P-00350-1
TR15-2 Industrial Remote Mount RTD Assembly
Assembly description: Industrial assembly configured
Unit of Measure: Metric (mm)
Connection head: 1/4000 F (Aluminum) w/o Flame Path
Electrical approval: FM Ex-proof Class 1 Division II
Instrument x Conduit entry: 1/2 NPT x M20x1.5
Terminal block/Transmitter: Without / flying leads
Neck extension: Flex armour with welded feed thru
Lead wire insulation: PVC armour over PTFE, application range
-20…+100 °C
W-Dimension: 4000 mm
Process fitting style: Spring loaded fitting (plain end bushing –
SS)
Process thread size: 1/2 NPT (male)
X-Dimension: 100 mm
Measuring element: Pt100, class B (IEC 60751)
Wiring configuration: Single 3-wire
Temperature range: -196…+450 °C
Tip construction: General purpose
Sensor diameter: 6.0 mm
Sheath material: Stainless steel 316 / 316 L (1.4401 / 1.4435)
A-Dimension: 350 mm
Certificates: Yes
Approval tags: Adhesive half-moon tag
Tagging: No tag
Sheath construction: MI-cable
Termination: Stripped leads
L-Dimension: 150 mm
Inspection certificate acc. to DIN EN 10204 3.1
Certificate Language: English and German
Measuring insert / probe
Accuracy: 3 test points (0°C / 100°C / 200°C) for RTD

Gas-actuated temperature switch, Stainless steel switch enclosure
Model TWG
Specifications according to data sheet: TV 31.60
Repeatability of set point: ≤ 0,5% of span
0 … +600 °C, working range -40 … +600°C, proof temperature +600°C
Set Point customer-specifically configured
1x SPDT silver contact, adjustable dead band
remote mounting with capillary
Capillary length: 4 m, stem diameter 12 mm (Standard) Standard. Take note
process connection: 1/2 NPT male
electrical connection: M20x1,5-F
Enclosure with plate for wall or direct mounting
without
active length X = 103 mm, insertion length Ymin = 163 mm, Ymax = 600 mm Standard. Take note
Approvals / Certificates: with
Certificates: without
brand: WIKA Instruments Italia
Unit: °C
TWGCUR
1. set point: 520.00 °C decreasing ,
1. Deadband value (calibrated): 60.00 °C
Approvals / Certificates
IECEx-ATEX Ex ia

Honeywell, Inc.191053 UV Sensing Tube for C7076

“WIKA” PRESSURE TRANSMITTER
MODEL IUT-10 IUT-11, STANDARD VERSION
REF. WIKA, GMBH
TYPE IUT-10-R-BCP-GD-ZMTAAL-1Z
RANGE:-1 TO 15 BAR, 4-20MA
P/N:63837587

Wika, Pressure Gauge, DSS1-MF990.27-123X50

PSRESS-GAUGE “WIKA”SERIES:232.50 & 233.50 & 433.50.263.30
CONN:1/2″ NPTM BOTTOM, ELEMENT,SOCKET,CASE & BEZEL.ST.ST
SILICONE OILFILLING,WHITE ALUMINIUM DIAL,BLACK LETTERING
CONNECTION ST.ST 1.4571(316SS TI)WITH BLOW OUT DISC ON BAC
INGRESS PROTECTION IP:65,BLACK ALUM,POINTER WINDOW OF LAMINATED SAFETY GLASS,ACCURACY -+1%OF FSD
WEATHER PROTECTION IP 54
SUPPLIER:WIKA CO
MODEL:433.50,DIAL:100,DIAPHRAGM TYPE,
PROCESS INDUSTRY SERIES,250MBAR DIAPHRAGM DURATHERM
INTERNAL OVERLOAD PROTECTION 400%
LIQUID FILLED SOLID FRONT,CONN:1/2″NPTM BOTTOM
MT.11:9915181-PA
MT11:9821018-PA,9821017-PA,9900074-PA,9821022 PA RANGE 0-0.04 BAR
OVER PRESS. PROTECTOR

PRESSURE & DIFF.PRESSURE.GAUGE “WIKA”
GLYCERINE FILLED,BOTTOM CONNECTION:1,1/2 INCH ELEMENT,SOCKET,CASE & BEZEL 316SS,WHITE ALUMINIUM
DIAL:BLACK LETTERING:BLACK ALUMINIUM POINTER LAMINATED SAFETY GLASS:BLOW-OUT DISC
INGRESS PROTECTION:IP65
SUPPLIER:WIKA CO.OR EQUIVALENT
MODEL:232.30, NACE DIAL SIZE:100 MM,CONNECTION :1/2”
BOURDON TUBE,S/N0:18895248,DRW.N0:1558889 TAG NO:6104-PG-002,6003—PG-049,6014-PG-052
RANGE:0 TO 60 BAR,NACE
• 010801 L 1/2 NPTM MATERIAL 316L ,ELEMENT TYPE:BOURDON

Wika, Pressure Gauge, DSS1-MF990.27-123X50-DZZZDC8A65ZA1-
ZZAZZZZZ WAZ-Z LABEL-PG1DE-ZZZZZZZZZZ
233.50-E-BG440Z-CA-UZHZAZZ-ZZZZ
213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM202SFC1-H2-H2ZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50
Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm,
Scale range: 0…40 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety

glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare Material pressure element: Measuring System
316L Case filling fluid: glycerine Ingress protection: IP 65
Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: 0°C Process temperature
max.: + 100°C Ambient temperature pressure meas. min: +
10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model
990.27 Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 300 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404
(316L); UNS S31603 Diaphragm material: Hastelloy C276
2.4819; UNS N10276 Sealing face material: Hastelloy C276
2.4819; UNS N10276 Label: WIKA standard without / with Tagnumber,
tandard Hastelloy C276 2.4819; UNS N10276
dipahragm seal

PRESSURE GUAGE MAT.ST.ST TYPE:MGS20/3/A/DRY DS100+DIAPHRAGM SEAL
TYPE MGS9/5/S44
2″ 600LG
RANGE: 0-100 BAR
VENDOR:WIKA

PRESSURE GAUGE WITH FLANGED PROCESS CONNECTION RANGE:0-60 BAR MODEL:01.20.2A
TYPE:BOURDON COMPLETE WITH DIAPHRAGM SEAL, DIAL:100mm, CONNECTION
LOCATION:BOTTOM, FLANGE TYPE:1-1/2″ 600 RF AISI 316 ,TAG:PI-20252 VENDOR:NUOVA FIMA

PRESSURE GAUGE MODEL:MGS 18 SCALE:0-10 barg DIAL SIZE:100mm SENSOR TYPE:DIAPHRAGM
CONNECTION LOCATION:BACK THREADED CONNECTION:1/2 NPTM TAG NO:RU-6001,PI-60159
VENDOR:NUOVA FIMA
Part No.RU-6001

Wika, ZT4080.00, DSS1-MF990.27-123X50-DZZZDC8A65ZA1-
ZZAZZZZZ WAZ-Z LABEL-PG1DE-ZZZZZZZZZZ
233.50-E-BG410Z-CA-UZHZAZZ-ZZZZ
213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM201SFC1-H2-H2ZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50
Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm
Scale range: 0…10 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety
glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare, Material pressure element: Measuring
System 316L Case filling fluid: glycerine Ingress protection: IP
65 Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: 0°C Process temperature
max.: + 100°C Ambient temperature pressure meas. min: +
10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model
990.27 Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 150 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404
(316L); UNS S31603 Diaphragm material: Hastelloy C276
2.4819; UNS N10276 Sealing face material: Hastelloy C276
2.4819; UNS N10276

ZT5211.00 A52/1, 0…160°C , L1=70x4mm
Bimetallic Thermometer,for industrial apllications A52S

Wika Pressure Gauge ZT4080.00, 233.50.100 10 bar
Diaphragm Seal lower mount,
DSS1-MF990.27-123X50-DZZZD-C6A65ZA1-ZZAZZZZZ
WAZ-Z
LABEL-PG1DE-ZZZZZ- ZZZZZ
233.50-E-BG410Z-CA-UZHZAZZ-ZZZZ
213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM201SFC1-TL-TLZZZZZ Z
Bourdon Tube Pressure Gauges, Stainless Steel
Series
Model: 233.50
Specifications according to data sheet: PM 02.02
Measuring system: stainless steel
Case filling: with
Nominal size: 100 mm
Scale range: 0…

10 bar
Process connection: Diaphragm Seal
Connector location: lower mount
Window: laminated safety glass
Pointer: adjustable pointer
Accuracy class: class 1.0
Overpressure safe: standard
Case material: Stainless steel 1.4301
Case surface: bare
Material pressure element: Measuring System 316L
Case filling fluid: glycerine
Ingress protection: IP 65
Movement: stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)
Manufacturer logo: *WIKA*
with Serial number
Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: Direct assembly
System fill fluid: KN 2 Silicone oil for general applications
Process temperature min.: + 21°C (room temperature)
Process temperature max.: + 110°C
Ambient temperature pressure meas. min: + 10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm
Specifications according to data sheet: DS 99.27
Diaphragm seal: Model 990.27
Diaphragm seal: Model 990.27
Process connection standard: following ASME B16.5
Process connection: 2"
Nominal pressure rating: Class 150
Sealing face: RFSF
Upper body material / main body material: Stainless steel
1.4404 (316L); UNS S31603
Diaphragm material: Tantalum; UNS R05200
Sealing face material: Tantalum; UNS R05200
Label: WIKA standard without / with Tag-number

Wika Pressure Gauge ZT4080.00, 233.50.100 40 bar
Diaphragm Seal lower mount,
DSS1-MF990.27-123X50-DZZZD-C6A65ZA1-ZZAZZZZZ
WAZ-Z
LABEL-PG1DE-ZZZZZ- ZZZZZ
233.50-E-BG440Z-CA-UZHZAZZ-ZZZZ
213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM202SFC1-TL-TLZZZZZ Z
Bourdon Tube Pressure Gauges, Stainless Steel
Series
Model: 233.50
Specifications according to data sheet: PM 02.02
Measuring system: stainless steel
Case filling: with
Nominal size: 100 mm
Scale range: 0…40 bar
Process connection: Diaphragm Seal
Connector location: lower mount
Window: laminated safety glass
Pointer: adjustable pointer
Accuracy class: class 1.0
Overpressure safe: standard
Case material: Stainless steel 1.4301
Case surface: bare
Material pressure element: Measuring System 316L
Case filling fluid: glycerine
Ingress protection: IP 65
Movement: stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)
Manufacturer logo: *WIKA*
with Serial number
Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: Direct assembly
System fill fluid: KN 2 Silicone oil for general applications
Process temperature min.: + 21°C (room temperature)
Process temperature max.: + 110°C
Ambient temperature pressure meas. min: + 10°C
Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm
Specifications according to data sheet: DS 99.27
Diaphragm seal: Model 990.27
Diaphragm seal: Model 990.27
Process connection standard: following ASME B16.5
Process connection: 2"
Nominal pressure rating: Class 300
Sealing face: RFSF
Upper body material / main body material: Stainless steel
1.4404 (316L); UNS S31603
Diaphragm material: Tantalum; UNS R05200
Sealing face material: Tantalum; UNS R05200
Label: WIKA standard without / with Tag-number

Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: Direct assembly
System fill fluid: KN 2 Silicone oil for general applications
Process temperature min.: + 21°C (room temperature)
Process temperature max.: + 110°C
Ambient temperature pressure meas. min: + 10°C
Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm
Specifications according to data sheet: DS 99.27
Diaphragm seal: Model 990.27
Diaphragm seal: Model 990.27
Process connection standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 600
Sealing face: RFSF
Upper body material / main body material: Stainless steel
1.4404 (316L); UNS S31603
Diaphragm material: Hastelloy C276 2.4819; UNS N10276
Sealing face material: Hastelloy C276 2.4819; UNS N10276
Label: WIKA standard without / with Tag-number
** Quoted Hastelloy C276 2.4819; UNS N10276 for wetted
part.

Wika, Bourdon Tube Pressure Gauges, 14523033, Model:
233.50, Process connection: Diaphragm Seal Connector
location: lower mount, Specifications according to data sheet:
PM 02.02
Measuring system: stainless steel
Case filling: with
Nominal size: 100 mm
Scale range: 0…16 bar
Process connection: Diaphragm Seal
Connector location: lower mount
Window: laminated safety glass
Pointer: adjustable pointer
Accuracy class: class 1.0
Overpressure safe: standard
Case material: Stainless steel 1.4301
Case surface: bare
Material pressure element: Measuring System 316L
Case filling fluid: glycerine
Ingress protection: IP 65
Movement: stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)
Manufacturer logo: *WIKA*
with Serial number
Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: Direct assembly
System fill fluid: KN 2 Silicone oil for general applications
Process temperature min.: 0°C
Process temperature max.: + 100°C
Ambient temperature pressure meas. min: + 10°C
Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm
Specifications according to data sheet: DS 99.27
Diaphragm seal: Model 990.27
Diaphragm seal: Model 990.27
Process connection standard: following ASME B16.5
Process connection: 2"
Nominal pressure rating: Class 300
Sealing face: RFSF
Upper body material / main body material: Stainless steel
1.4404 (316L); UNS S31603
Diaphragm material: Nickel; UNS N02200
Sealing face material: Nickel; UNS N02200
Label: WIKA standard without / with Tag-number

Wika, Pressure gauge, ZT4080.00,
DSS1-MF990.27-123X50-DZZZD-C8A65ZA1-ZZAZZZZZ
WAZ-Z LABEL-PG1DE-ZZZZZ- ZZZZZ 233.50-E-BV416ZCA-
UZHZAZZ-ZZZZ 213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM202SFC1-H2-H2ZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50
Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm
Scale range: -1…+15 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety
glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare Material pressure element: Measuring System
316L Case filling fluid: glycerine Ingress protection: IP 65
Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: 0°C Process temperature
max.: + 100°C Ambient temperature pressure meas. min: +
10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model
990.27 Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 300 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404

(316L); UNS S31603 Diaphragm material: Hastelloy C276
2.4819; UNS N10276 Sealing face material: Hastelloy C276
2.4819; UNS N10276 Label: WIKA standard without / with Tagnumber,
Hastelloy C276 2.4819; UNS N10276 dipahragm seal

Wika, Pressure gauge, ZT4080.00,
DSS1-MF990.27-123X50-DZZZD-C8A65ZA1-ZZAZZZZZ
WAZ-Z LABEL-PG1DE-ZZZZZ- ZZZZZ 233.50-E-BG410ZCA-
UZHZAZZ-ZZZZ 213D3AZIXX0ZZ2Z-IZZZZZZ12ZZZ
H990.27-ASM202SFC1-TL-TLZZZZZ Z Bourdon Tube
Pressure Gauges, Stainless Steel Series Model: 233.50
Specifications according to data sheet: PM 02.02 Measuring
system: stainless steel Case filling: with Nominal size: 100 mm
Scale range: 0…10 bar Process connection: Diaphragm Seal
Connector location: lower mount Window: laminated safety
glass Pointer: adjustable pointer Accuracy class: class 1.0
Overpressure safe: standard Case material: Stainless steel 1.4301
Case surface: bare Material pressure element: Measuring System
316L Case filling fluid: glycerine Ingress protection: IP 65
Movement: stainless steel Packaging: single packing Pressure
Gauge Standard: International (standard Europe) Manufacturer
logo: *WIKA* with Serial number Diaphragm seal system with
1 diaphragm seal Assembly specification High-Side: Direct
assembly System fill fluid: KN 2 Silicone oil for general
applications Process temperature min.: 0°C Process temperature
max.: + 100°C Ambient temperature pressure meas. min: +
10°C Ambient temperature pressure meas. max: + 40°C
Diaphragm seal, flange type, flush diaphragm Specifications
according to data sheet: DS 99.27 Diaphragm seal: Model 990.27 Diaphragm seal: Model 990.27 Process connection
standard: following ASME B16.5 Process connection: 2"
Nominal pressure rating: Class 300 Sealing face: RFSF Upper
body material / main body material: Stainless steel 1.4404
(316L); UNS S31603 Diaphragm material: Tantalum; UNS
R05200 Sealing face material: Tantalum; UNS R05200 Label:
WIKA standard without / with Tag-number

Wika, Diaphragm Pressure Gauge, 14523233, Process Industry
Model: 433.50 Specifications according to data sheet: PM 04.03
Case filling: with Case: with pressure blowout disk Nominal
size: 100 mm Scale range: -20…+40 mbar Process connection:
3" class150 RF acc to ASME B16.5 316L with hastelloy
C276 lining (SSG-103441) Diaphragm Material: Hastelloy C276
Lower Body Material: SS with Hastelloy C276 lining Pointer:
standard pointer Permissible medium temperature: -20 … +100
°C (-4 … +212 °F) Accuracy class: class 2.5 Overpressure
safety: maximum scale reading (fsd) Case material: Stainless
steel 1.4301 Case surface: bare Case filling fluid: glycerinewater-
mixture Ingress protection: IP 65 Sealing of pressure
chamber: PTFE Window: laminated safety glass Pressure Gauge
Standard: International (standard Europe) Manufacturer logo:
*WIKA* serial number on dial: Serial number *…*

لیست کالا های به کار رفته از برند WIKA در پروژه های اخیر

به دنبال کمک هستید؟

شبکه های اجتماعی

تماس با ما

ساعات کاری

لینک ها